Yaskawa VS-616G5 Series Revision F Programming Manual Manual de usuario descargar pdf (Pagina 61)

VS-616G5 Programming Manual 61

V/f V/f w/PG

Open Loop

Vector

Flux

Vector

E3 Motor 2 Set-up

The G5 inverter has the capability to control 2 motors independently. A second motor may be selected

using a multi-function contact input.

Select the control method best suited for your application for Motor 2.

The following is a list of parameters that become effective when motor 2 is selected.

The inverter must be stopped to switch motors.

E3-01 Motor 2 Control Method Selection Control Method

A A A A

Setting Description

0 V/f Control - For general-purpose and multiple motor applications.

1 V/f with PG Feedback - For general-purpose applications requiring closed

loop speed control.

2 Open Loop Vector (factory default) - For applications requiring precise

speed control, quick response and higher torque at low speeds (150%

torque below 1Hz).

3 Flux Vector - For applications requiring very precise speed and torque con-

trol at a wide speed range including 0 speed. Uses encoder feedback.

Motor 1

Motor 2

Function E3 Function E4 Function E5

Control Method 2 V/F Pattern 2 Motor Setup 2

E3-01 Control Method 2 E4-01 Max Frequency E5-01 Motor Rated FLA

E4-02 Max Voltage E5-02 Motor Rated Slip

E4-03 Base Frequency E5-03 No-Load Current

E4-04 Mid Frequency E5-05 Term Resistance

E4-05 Mid Voltage E5-06 Leak Inductance

E4-06 Min Frequency

E4-07 Min Voltage

Section E: Motor Parameters

E3 Motor 2 Set-up

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 161 162

Sin comentarios

Yaskawa VS-616G5 Series Revision F Programming Manual Manual de usuario Pagina 61