Yaskawa VS-616G5 Series Revision F Programming Manual Manual de usuario descargar pdf (Pagina 115)

VS-616G5 Programming Manual 115

Setting Range: 0.0 to 10.0s

Factory Default: 0.1s

The overtorque detection 2 delay time inserts a delay, between the time motor current (or torque)

exceeds the overtorque detection level (L6-05) and when the second overtorque detection function is

enabled. The digital operator then displays “OL3”.

L7 Torque Limit

The torque limit function limits the amount of motor torque in all four quadrants of vector control

operation:

· Forward Motoring · Forward Regenerating

· Reverse Motoring · Reverse Regenerating

Torque limit is activated in both the speed and torque control modes.

Setting Range: 0 to 300%

Factory Default: 200%

Sets the motoring side torque limit value during FWD run.

Setting Range: 0 to 300%

Factory Default: 200%

Sets the motoring side torque limit value during REV run.

Setting Range: 0 to 300%

Factory Default: 200%

Sets the regenerating side torque limit value during FWD run.

Setting Range: 0 to 300%

Factory Default: 200%

Sets the regenerating side torque limit value during REV run.

L6-06 Overtorque Detection 2 Time Torq Det 2 Time

A A A A

L7-01 Forward Torque Limit Torq Limit Fwd

− − B B

L7-02 Reverse Torque Limit Torq Limit Rev

− − B B

L7-03 Regenerative Forward Torque Limit Torq Lmt Fwd Rgn

− − B B

L7-04 Regenerative Reverse Torque Limit Torq Lmt Rev Rgn

− − B B

Section L: Protection Parameters

L7 Torque Limit

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 161 162

Sin comentarios

Yaskawa VS-616G5 Series Revision F Programming Manual Manual de usuario Pagina 115