Yaskawa VS-616G5 Series Revision F Programming Manual Manual de usuario descargar pdf (Pagina 60)

V/f V/f w/PG

Open Loop

Vector

Flux

Vector

60 VS-616G5 Programming Manual

Section E: Motor Parameters

E2 Motor 1 Set-up

Sets the motor leakage inductance in units of 0.1%. The default setting varies depending on the

inverter model setting (O2-04).

Setting Range: 0.00 to 1.00

Factory Default: 0.5

Sets the motor iron core saturation coefficient at 50% of the magnetic flux. This parameter is set auto-

matically during auto-tuning, so it does not need to be changed.

Setting Range: 0.00 to 1.00

Factory Default: 0.75

Sets the motor iron core saturation coefficient at 75% of the magnetic flux. This parameter is set auto-

matically during auto-tuning, so it does not need to be changed.

Setting Range: 0.0 to 10.0%

Factory Default: 0.0%

Sets the motor mechanical loss as a percentage of motor rated output power, in units of 0.1%.

Setting Range: 0 to 65535

Factory Default: 14 (Factory default depends on inverter capacity.)

This parameter sets the motor iron loss of the torque compensation.

E2-06 Leakage Inductance Leak Inductance

− −

A A

E2-07 Core-Saturation Compensation Coefficient 1 Saturation Comp1

− −

A A

E2-08 Core-Saturation Compensation Coefficient 2 Saturation Comp2

− −

A A

E2-09 Motor Mechanical Loss Mechanical Loss

− − −

E2-10 Motor Iron Loss Torque Compensation <1110> Tcomp Iron Loss

A A

− −

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 161 162

Sin comentarios

Yaskawa VS-616G5 Series Revision F Programming Manual Manual de usuario Pagina 60