Yaskawa VS-616PS5 Series Programming Manual Manual de usuario descargar pdf (Pagina 96)

96 VS-616PS5 Programming Manual

Section O: Operator Parameters

O1 Monitor Selection

Selects the monitor to be displayed on the digital operator immediately after the

power supply is turned ON.

Units for parameters and monitors related to frequency can be scaled as shown

below.

O1-02 Monitor Selection After Power-up B

Setting Description

1 Displays frequency reference (factory default).

2 Displays output frequency.

3 Displays output current.

4 Displays the monitor set in O1-01.

O1-03 Scale for Setting and Monitoring Frequency B

Setting Description

1 Unit: 0.01%. Speed reference is displayed as P¨¨.¨¨

2 ~ 39 • Unit: rpm

• Unit: 120 (Hz) frequency reference/(E1-05)

• The speed reference is displayed as n ¨¨¨¨

40 ~ 3999 Digits: 5th 4th 3rd 2nd 1st

0 0 0 0 0

The 1st through 4th digits determine the set value at 100% output frequency.

The decimal point position is set with the 5th digit of O1-03, as follows:

5th digit = 0: displayed as ¨¨¨¨

5th digit = 1: displayed as ¨¨¨.¨

5th digit = 2: displayed as ¨¨.¨¨

5th digit = 3: displayed as ¨.¨¨¨

(Example 1)

If 100% output frequency is equal to 200.0 units:

Set O1-03 = “12000”

100% of this reference is displayed as 200.0 and 60% of this reference is dis-

played as 120.0.

Example 2

If 100% output frequency is equal to 65.00:

Set O1-03 = “26500”

60% of this reference is displayed as 39.00.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 112 113

Sin comentarios

Yaskawa VS-616PS5 Series Programming Manual Manual de usuario Pagina 96