Yaskawa VS-616PS5 Series Programming Manual Manual de usuario descargar pdf (Pagina 100)

100 VS-616PS5 Programming Manual

T Tuning Parameters

T1 Auto-tuning

Auto-tuning is required at the time of commissioning to allow the drive to determine

the angular displacement between the magnetic pole position and hall sensor/

encoder marker pulse position. This is necessary to insure optimum performance in

the Pm machine.

The tuning mode is set in this parameter. Tuning is performed in the drive mode by

setting T1-02 = 2, and pressing the digital operator RUN key.

After auto-tuning is completed, the setting automatically returns to “0.”

T1-02 Tuning Mode Q

Setting Description

0 Normal running mode (factory default)

2 Auto-tuning mode

T1-03 Tuning Operation Selection Q

Setting Description

0 Auto-tuning procedures are performed on all parameters (under development.

1 Only PG origin pulse adjustment is performed (factory default).

Section T: Tuning Parameters

T1 Auto-tuning

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 112 113

Sin comentarios

Yaskawa VS-616PS5 Series Programming Manual Manual de usuario Pagina 100