Yaskawa VS-616PS5 Series Programming Manual Manual de usuario descargar pdf (Pagina 9)

VS-616PS5 Programming Manual 9

Main Menu:Initialize <ENTER>

A Initialization Parameters

A1 Initialization Set-up

This parameter allows the “masking” of parameters according to user level. See the

following table:

Use this parameter to reset the inverter to its factory default settings. Initialize the

inverter after changing the control PCB, or after selecting inverter capacity (O2-04).

This parameter allows password entry to view masked parameters.

A1-01 Parameter Access Level Q

Setting Description

0 Operation Only

2 Quick Start Level (factory default) - For maintenance-level programming.

3 Basic Level - For basic programming in most applications.

4 Advanced Level - For advanced programming in special applications.

A1-03 Operator Status Q

Setting Description

0 No Initialization (factory default).

2220 2-Wire Initialization - terminal 1 becomes FWD run command and

terminal 2 becomes REV run command. All other parameters are

reset to their original factory default settings.

3330 3-Wire Initialization - terminal 1 becomes run command, terminal 2

becomes stop command and terminal 3 becomes FWD/REV run

selection. All other parameters are reset to their original factory

default settings.

A1-04 Password Entry Q

Section A: Initialization Parameters

A1 Initialization Set-up

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 112 113

Sin comentarios

Yaskawa VS-616PS5 Series Programming Manual Manual de usuario Pagina 9