YASKAWA NX100 Manual del operador descargar pdf (Pagina 38)

[How to Operate]

Select the line to be pasted in the “ladder preview” display, and select [Edit] –

[Paste Rung]. Or select

from the main tool bar (refer to “26.2.1 Main Tool

Bar”).

Note: This function is disabled if several lines were cut or copied by pressing

[Cut Rung] or [Copy Rung] in the operation immediately before. After

selecting only one line and pressing [Cut Rung] or [Copy Rung], try

pasting again.

11.4 Inserting and Pasting a Ladder Diagram Line

Insert the cut or copied contents of the line into the line selected in the “ladder

preview” display. Therefore, the ladder data after the inserting/pasting line will be

shifted backward.

When several ladder list files are open simultaneously, the ladder diagram can be

inserted and pasted onto another ladder list file.

[How to Operate]

Select the line to be inserted and pasted in the “ladder preview” display.

Then select [Edit] – [Insert Cut/Copied Rung]. Or select

from the main

tool bar (refer to “26.2.1 Main Tool Bar”).

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 90 91

Sin comentarios

YASKAWA NX100 Manual del operador Pagina 38